Header Image
ThruScan® Walk-Through Metal Detectors s6

Walk-Through Metal Detectors s6


Conforms to European Norms and in Compliance with NILECJ-0601.00 L1-5 Standard and produced under ISO 9001: 2008 QMS (Chinese Metal Detectors comply their own National Norms Only)

• We do not use China Made Production Input. (Chinese Equipment Sockets/Connectors and Electronic Circuitry is rather low quality and in most cases Exporter/Manufacturer and the Model Number Serial No is not even Clear and probably without a proper User’s Manual)

•Certified Safe regarding Electromagnetic Field-EMC, IP Protection Levels, International Health and Safety Norms ( Certification could be Potato Stamp)

• No Set Up Change is Necessary regarding Winter/Summer Seasnal Adjustments and Resistant to Vibration & Impact (Chinese Equipment my require Adjustments as per Temperature Changes)

• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.
• Give Alarm to all threat objects detected at different Alarm Zones. (Chinese equipment detects the Largest Threat Objects while others are not Pinpointed)

• Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

• No Interferences between Zones and No False Alarms (Chinese equipment does not operate like this once detect and then not)
• Multi-Zone - 6 Real Detection Zones(Up/Middle/Down and Left/Right)
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
• 10 sensitivity levels, 246 adjustable sensitivity steps at each
• Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media (Certification with Chinese Equipment should be carefully checked)

• Green/Red bicolor traffic through LEDs easily allows sight from distance 30 Persons/Minute
• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
• Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
• Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4x20 Characters LCD Screen
• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation.
• Five Digit Incoming Counter (Visible/Invisible)
• IR Pass Sensor ON/OFF Selection
• Four-digit changeable digital Pin Code
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
• Reloading the factory default settings by one-touch button
• Easy programming and monitoring with wide LCD display
• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
• OPTIONAL -Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
• No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)
• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
• IP 20 Protection Level (EN 60529)
• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height
• Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects
• Audio-Visual alarms are noticeable at a range of 2 meters
• Micro-Processor Settings does not change when there is an electricity cut-off
• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
• In conformity to CE and Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations.

• Weight: 51 kg

• Gross weight: 60 kg

• Operating voltage:70VAC – 270VAC / 50Hz - 60Hz

• Power: 10W Stand By- 20W (Alarm)

• Package Dimensions (W x H x L): Box 1: 560 x225 x 2270 mm Box 2: 225 x 235 x 790 mm

• Ambient Temperature: -20°C to +70°

Join Our Mailing List

Hata Gereklı alanı doldurun tesekkurler gönderildi...
Share!
  • Facebook
  • Flickr
  • Twitter
  • Rss Feed
  • LinkedIn
Ataturk Industrial Zone M. K. Ataturk Blv. 23 Cigli 35620 Izmir/Turkey