Header Image
ThruScan® Kapi Tipi Metal Dedektör s16-i

Walk-Through Metal Detectors s16-İ

International norms (NILECJ-0601 L1-5/ EN60950 Class1/IP44) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS

• Multi-Zone - 9 or 16 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
• Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand

• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.

• Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
• Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

• No Interferences between Zones and No False Alarms
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

• Detects Metals regardless their orientation

• 10 sensitivity levels, 246 adjustable sensitivity steps at each

• Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit

• Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media

• Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels

• Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x20 Characters LCD Screen

• Special Environmental Magnetic Interference Display Menu

• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation

• IP 44 Protection Level (EN 60529)

• Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero.
• Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken.

• Four-digit changeable digital Pin Code

• Automatic Failure Display Function on LCD

• Reloading the factory default settings by one-touch button

• Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)

• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish

• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms

• STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains

• No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)

• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height

• Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects

• Audio-Visual alarms are noticeable at a range of 2 meters

• Micro-Processor Settings does not change when there is an electricity cut-off

• All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.

• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)

• SCADA remote data communication and Networking of Multiple Metal Detectors - Send - Change settings by PC – Software Optional

• Manufactured using the latest technology components and Resistant to Vibration & Impact

•Weight: 54 kg

•Gross weight: 62 kg

•Operating voltage:70VAC – 270VAC / 50Hz - 60Hz

•Power: 10W Stand By- 20W (Alarm)

•Package Dimensions (W x H x L): Box 1: 620 x230 x 2265mm Box 2: 225 x 235 x 790 mm

•Ambient Temperature: -20°C to +70°

Join Our Mailing List

Hata Gereklı alanı doldurun tesekkurler gönderildi...
  • Facebook
  • Flickr
  • Twitter
  • Rss Feed
  • LinkedIn
Ataturk Industrial Zone M. K. Ataturk Blv. 23 Cigli 35620 Izmir/Turkey