Since 2006
Sample Text
International norms (NILECJ-0601 L1-5 / NIJ 0601.02 Small Object Sensitivity 60529, EN 60068, EN60950 Class1 / IP44 ) In conformity with ECAC DOC 30 Standard 2, CE European Union Norms and produced under ISO 9001: 2015 QMS Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment) Multi-Zone - 27 Detection Zones (Up/Middle/Down and Left/Middle/ Right and Front/Rear) Separate Sensitivity Settings for Different Detection Zones Standard Preset JAILHOUSE / AIRPORT / MILITARY / POLICE PREMISES / SHOPPING MALL Security Levels Whilst Normal Operation, displays IN/OUT Counters and Security Level on 64x128 GLCD without abbreviations so that Security Staff can easily understand Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities.Displays Location of the Detected Metal Objects with Continuous LED Zone Indicators on Both Side Panels from top to bottom Can detect when tested both individually and in combination. Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm. No Interference between Zones and No False Alarm Random Alarm Feature enables to scan some percentage of clean people Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top Detects Metals regardless their orientation20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, - 10 Preset International Security Programs Automatic Frequency Selection Feature Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LED's easily allows sight from distance Superior Discrimination, Pin Point target location identification with Graphical zone display on Control Unit Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels Record Statistics of Operation Duration, number of visitors and alarms Real Time Environmental Magnetic Noise Level Display10 Adjustable audio tones with 10 volume levels (enabling Mute Operation) Adjustable Alarm Duration IR Protection Feature enabling perfect low false alarm operation/Continuous Detection Mode Selection EnabledIP65 (EN 60529) protection Five Digit Incoming/ Outgoing Alarm Counters (Visible/Invisible)Interference free Operation from other Electronic Devices and Does not affect other Electronic Equipment. Necessary filtering precautions have been taken Four-digit changeable digital Pin Code and Mechanical Lock Automatic Failure Display Function on GLCD with continuous self checking of key parameters (BITE - Built In test Equipment)Reloading the factory default settings by one-touch button Easy Programming and Display via High Resolution GLCD (Graphical Liquid Crystal Display)Different Menu Languages, Standard menu in English, German, Spanish, Turkish and Arabic Relay output for recording CCTV, Photo Recording, controlling turnstiles, etc. Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains Battery ON/OFF Feature enabling Operation Without Mains
Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design Built for 7/24 Continuous Operation74 cm Net Passage Width and 200 cm Net Passage Height Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objects Installation and Operation without interference between two detectors up to a distance of min. 5 cm Audio-Visual alarms are noticeable at a range of 4 meters Micro-Processor Settings do not change when there is an electricity cut-off No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic devices Magnetic Field inside all passage area is 0.1 Gauss All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No external units. ABS Footers for sturdy placement and durable use.Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 64x128 Characters GLCD Screen Optional -SCADA Software-Controlled remote data communication and Networking of Multiple Metal Detectors; Software to Change settings by PC (Digital output for Network Connection Optional REAL-TIME VIDEO PROSECUTION UNIT enabling recording of Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 Images Optional IRDA (Pilot) Remote Control Unit Detection functions have been tested with ECAC/NIJ/TSA Test Kits and Certified Technical Features: Package Dimensions (W x L x H):Ambient Temperature: -20°C to +70°C Box 1: 81 x 235 x 21cm (65 kg)Operating voltage:70 VAC – 270VAC / 50Hz - 60Hz Box 2: 43 х 81 х 27 cm& (14 Kg)Power: 10W Stand By- 20W (Alarm) Net Weight: 61 KgNet Passage: 74 x 68 x 200 cm External: 85 x 68 x 220 cm Gross Weight: 79 Kg
created with