ThruScan® s9
Walk Through Metal Detector

International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2015 QMS

Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)

Multi-Zone - 9 Real Matrix Detection Zones (Up/Middle/Down and Left/Middle/Right)

Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand

Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities.

Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators

Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

Detects Metals regardless their orientation10 sensitivity levels, 246 adjustable sensitivity steps at each + 1 Standard preset International Security Program

No Interference between Zones and No False Alarms

Can detect test objects both individually and in combination.Metal Density-Mass by 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

Superior Discrimination, Pin Point target location identification with Graphical zone display on Control Unit

Can detect test objects both individually and in combination.Human Health friendly Very Low Frequency VLF technology, No effect on Pace Makers, Pregnant and Magnetic Media

Green/Red bi-colour traffic LEDs easily allows sight from distance and LED Alarm Indicators on side panels

Operation Mode, Programming Parameters and Error Codes are displayed on Wide 4x20 Characters LCD Screen

Visual display of magnetic interference from environment.10 Adjustable audio tones with 10 volume levels (enabling Mute Operation)IP 44 (Optional IP 65) Protection Level (EN 60529)Five Digit Incoming/ Outgoing traffic counter (can be made invisible) with 60 persons/Min speed

Alarms counted separately

Interference free operation from other Electronic Equipment. Necessary altering precautions have been taken.Four-digit changeable digital Pin Code + Mechanical Lock

Automatic Failure Display Function with continuous self-checking of key parameters (BITE - Built In test Equipment)

Reloading the factory default settings by one-touch button

Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)4 Menu Languages, Standard menu in English, German, Spanish and Turkish

Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms

STANDARD Built-in Uninterrupted Power Supply (UPS) enabling 2 hours operation without mains

No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

Manufactured for 24/7 Continuous Operation74 cm Net Passage Width and 200 cm Net Passage Height

Interference free Operation at Middle Level Sensitivity of 10 cm stagnate for Metals and 200 cm distance for moving.Audio-Visual alarms are noticeable at a range of 4 meters

Micro-Processor Settings do not change when there is an electricity cut-off

No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic device.

All Electronic Units (electronic unit, power supply, battery, adaptor etc...) are inside the Equipment. No external units.

Strong plastic footers for sturdy placement and durable use.

Resistant to Vibration & Impact

Optional -SCADA Networking of Multiple Metal Detectors; Change settings by PC (Digital output for Network Connection)

Manufactured using the latest technology and advanced components


Technical Features:                                                       Package Dimensions (W x L x H):
Ambient Temperature: -20°C to +70°                           Box 1: 81 x 235 x 21 cm (65 kg)
Operating voltage: 70VAC – 270VAC / 50Hz - 60Hz Box 2: 25 х 80 х 27 cm (12 kg)
Power: 10W Stand By- 20W (Alarm)                               Net Weight: 60 Kg
Net Passage: 74 x 68 x 200 cm
External: 85 x 68 x 220 cm
Gross Weight: 77 Kg

get an offer brochure user manual related products